The CB series of Back-lit Collimated Backlights deliver precision silhouetting for a range of machine vision applications.
The CB series of Back-lit Collimated Backlights deliver precision silhouetting for a range of machine vision applications.
Application examples include glass and plastic container defect detection, printed curcuit board hole accuracy and thread inspection, etc.
The CB series is expandable up to 16″ x 16″ (406mm) in increments of 1” (25mm)
This series comes with LB111 Mounting Brackets.
PCN No: 170
Date Issued: April 14, 2022
Notice Type: Product Discontinuation
Product Type: BLXXYY and CBXXYY
Change Notification Summary
Advanced Illumination (Ai) will be discontinuing the sale of BLXXYY and CBXXYY Backlights on October 13, 2024, and will be recommending the new BL2-XXYY Series as a replacement. The BL2-XXYY Series provides an improvement in light output, structural rigidity, emitting window uniformity, and efficiency, at no additional cost over the original BLXXYY and CBXXYY designs. However, note that the replacement BL2-XXYY mechanical design is approximately 1/4" larger in length and width for an equivalent emitting window size configuration. This difference in size should be considered during assembly mounting planning for replacements.
Please contact our sales department if you have any questions or concerns.
PCN No: 165
Date Issued: March 18, 2022
Notice Type: Optical Component Update
Product Type: BL, CB and FX
Change Notification Summary
In an effort to improve our products, Advanced illumination (Ai) has upgraded the optical components on the BX, CX, and FX Series. This upgrade only applies to size configurations less than or equal to 8" in non-illuminated length, otherwise known as the power side of the unit. This change will result in a brightness increase of roughly 40% over the previous revision. Pricing for each unit will remain the same. This change has gone into effect on BX, CX, and FX lights with serial numbers greater than 22060XXXX.
Please contact your Ai Sales Representative if you have any questions.
PCN No: 152
Date Issued: June 15, 2020
Notice Type: Product Revision Change
Product Type: BLXXYY, CBXXYY, FDXXYY, BL128, BL193, BL245
Change Notification Summary
In an effort to improve our products, Advanced illumination (Ai) will be updating the internal drivers and white LEDs used in the BLXXYY, CBXXYY, FDXXYY, BL128, BL193, and BL245. This change will result in white lights seeing a brightness increase of roughly 70% while maintaining equal pricing for small configurations and reduced pricing for large configurations. Excluding the BL128, 24V configured units will experience a current draw shift from 20mA to 30mA per sq. inch for 470nm, 520nm and white units while controller configured units will see a current draw shift from 15mA to 18mA per sq. inch for the same color configurations. Color temperatures will remain unchanged.
The LED upgrade and internal driver update for white color configurations will take place September 15th. The internal driver updates will occur November 9th for 470nm and January 7th for 520nm.
Please contact your Ai Sales Representative if you have any questions.
Electrical Specifications
Color
24V Current
All Other Controls
470, 520, 660, 880, WHI
0.03A per sq. inch
0.018A Max per sq. inch
Normal Operating Temperature
0 - 60°C
Weight
8" X 8" unit - 1292.74g (45.6oz)
Standard Cable Information
2 m long -0/+150 mm (80" -0/+6") - 105°C rated PVC jacket, foil shield with drain.
Photobiological Risk Factor
Exempt (No-Risk) Applicable Wavelengths: 880
Group 1 (Low-Risk) Applicable Wavelengths: 470, 520, 660, WHI
Group 1 (Low-Risk) Applicable Wavelengths: 470, 520, 660, WHI
Compliance
CE, RoHS, IEC 62471
IP Rating
IP50
Lumen Maintenance
L70 = 50,000 Hours
Light Configurator
Controller Selector