Advanced Illumination»Products»Controllers»IC Inline Controller

Custom Product Design Available. Learn More

IC Inline Controller

The IC Inline Controller (ICS 2.0) provides steady and optimal current to lights from a small package when larger, more versatile discrete controllers are not necessary.

Provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming. 30 uSec response time.

Full Description

The IC Inline Controller provides steady and optimal current to lights from a small package when larger, more versatile discrete controllers are not necessary.

The IC provides continuous-on and DC gating on/off control as well as 0-10 volt analog dimming.

All ICS models employ reverse input polarity protection.

A wash down version is provided with any light to which it is attached is also wash down.

0 – 100% Intensity Control with optional DCS-MP, purchased separately, will provide manual intensity control via an external potentiometer.

Connection and Wiring Information

General Specs

Controller Style

Inline Control System (Cable Inline, Permanently Affixed)

Operating Modes

Gated Continuous, Continuous

Input Connection

Flying Tinned Leads or Optional A-coded 5-pin Male M12 Connector

Input Supply Requirements

24V DC Nominal, 1.25A Recommended
21V Min - 30V Max; Power Inputs Reverse-Polarity Protected

Output Channels

1 Inline Channel

Output Power

Continuous: 25W Max*

Output Current

Continuous: 1.25A Max*

Output Voltage

Vin - 1V

Gate Control

2.5V Min, 30V Max, <=5mA

Gate Protection

Protected up to 30V

Gate Delay

20μs + 10μs LED rise-time

Gate Frequency Limit

2KHz

Analog Dimming

0V - 10V (0% - 100%); <=5mA

Operating Temperature Range

0°C to +40°C

Storage Temperature Range

-25°C to +85°C

IP Rating

Non-sealed: Not Rated
Sealed: IP67

Dimensions

Non-sealed: 3.73" x 0.82" DIA (94.6mm x 20.6mm DIA)
Sealed: 5.06" x 0.82 DIA (128.7mm x 20.6mm DIA)

Weight

Approx. 0.106lb (48g)

Mounting

N/A (In-line)

Case Material

Polycarbonate

Warranty

5 Years

Compliance

CE, RoHS

*Values shown are based on controller component limitations. Actual limitations will vary depending on the limits set for the connected light head. These limits are hardcoded into each in-line controller to prevent LED failure from occurring when driven beyond the light's acceptable range.